Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #12

Editado por Nick Flor

Edicion aprobada por Nick Flor

Antes
Después
Sin cambios

Líneas de Paso

[title] Last step
[* black] The last step is to separate the plastic frame from the old Digitizer glass.
[* black] I recommend using a heat gun to heat up the glue and then easily separate the old digitizer.
[* black] You are now ready to put your new digitizer on the plastic frame and assemble the T-100.
[* icon_caution] BE VERY careful when applying heat to the plastic, it can easily bend so make sure you keep your heatgun/hairdryer on low heat.