Saltar al contenido principal

Cambios a Paso #11

Editado por jwkc2

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_note] There is a small plastic ring around the front-facing camera that may come away with the screen. Make sure to recover and reattach it to the camera before reassembly.
[* icon_caution] When reinstalling the display assembly, be sure the digitizer and display data cables are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will cause the digitizer cable to not reach its socket on the logic board.
[* icon_reminder] If you're replacing the display assembly, remember to take the metal mesh earpiece screen off the old display and put it on the new one. Most replacements do not include this mesh screen.
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].