Repara tus cosas Comunidad Tienda

Cambios al paso #4

Editado por Shanae Swack —

Edicion aprobada por Shanae Swack

Antes
Después
Sin cambios

Líneas de Paso

[* black] To add links:
- [* black] Push both link pins back into the watch. Make sure you insert the link pin on the front side of the arrow.
- [* black] Use light taps of a hammer until pins are flush against both sides of the watchband.
-[* icon_note] When adding links, be sure to insert the links at the same time as when inserting the link pins.
+ [* black] Push both link pins back into the watch. Make sure to insert the link pin on the front side of the arrow.
+ [* black] Lightly tap a hammer until pins are flush against both sides of the watchband.
+[* icon_note] When adding links, be sure to insert the links at the same time as the link pins.