Cambios al paso #13
Editado por Ryan Miller —
Edicion aprobada por Ryan Miller
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] The next several steps will be regarding the removal of the plastic back panel from the motherboard and keyboard of the computer | |
| [* black] The two pieces of plastic are only connected now by little plastic snaps now that the screws are out | |
| [* black] You will need to use the flat head of your screwdriver or the pocket knife is handy here too for this step | |
| [* red] There is a discrete little line between two pieces of plastic on the side of keyboard | |
| - | [* red] This is where you will insert the flat head or tip of the knife in order to slowly pry apart the two pieces of plastic |
| + | [* red] This is where you will insert the flat head or tip of the knife in order to slowly pry apart the two pieces of plastic |
| [* icon_note] A popping or snapping sound in the next couple steps is normal. Don't be afraid to do these parts, just take it slow and easy |