Cambios al paso #9
Editado por Ryan Miller —
Edicion aprobada por Ryan Miller
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_note] Take note of how the wire harness is routed around the piece of the motherboard and the plastic casing. | |
| [* black] Gently pull on the wire harness to get it out of the crevasse. | |
| - | [* red] Gently grab a hold of the white plastic end |
| + | [* red] Gently grab a hold of the white plastic end of the wire harness with your fingers or fingernails. |
| [* icon_caution] Be careful to not pull on the wires themselves as they may become disconnected from the white plastic connector. | |
| [* red] Carefully wiggle the plastic connector back and forth until you are able to smoothly disconnect the wire harness from the computer. |