Cambios al paso #9
Editado por Ryan Miller —
Edicion aprobada por Ryan Miller
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_note] Take note of how the wire harness is routed around the piece of the motherboard and the plastic casing |
|---|---|
| - | [* black] Gently pull on the wire harness to get it out of the crevasse |
| - | [* red] Gently grab a hold of the white plastic end on the wire harness with the end of your fingers or fingernails |
| - | [* icon_caution] Be careful to not pull on the wires themselves as they may become disconnected from the white plastic connector |
| - | [* red] Carefully wiggle the plastic connector back and forth until you are able to smoothly disconnect the wire harness from the computer |
| + | [* icon_note] Take note of how the wire harness is routed around the piece of the motherboard and the plastic casing. |
| + | [* black] Gently pull on the wire harness to get it out of the crevasse. |
| + | [* red] Gently grab a hold of the white plastic end on the wire harness with the end of your fingers or fingernails. |
| + | [* icon_caution] Be careful to not pull on the wires themselves as they may become disconnected from the white plastic connector. |
| + | [* red] Carefully wiggle the plastic connector back and forth until you are able to smoothly disconnect the wire harness from the computer. |