Cambios al paso #1
Editado por Jared Dalton —
Edicion aprobada por Jared Dalton
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] First make sure your computer is properly and completely shutdown. |
|---|---|
| - | [* black] Make sure to unplug anything connected to your computer, including the charger and USB drives. |
| - | [* red] Start by unscrewing the small panel on the bottom right of the computer. |
| - | [* icon_note] There is only one screw to remove in this step. |
| - | [* icon_note] Throughout the entire guide, there is only one 4.5mm screw. The rest of the screws in this guide are 6.5mm screws. Both types are size #00 Phillips heads. |
| + | [* black] Make the laptop is powered down and completely off before continuing. |
| + | [* black] Unplug all power cords and USB devices that are connected to the computer. |
| + | [* red] Using a Phillips #00 screwdriver, remove the 4.5mm screw on the panel located at the bottom right of the computer. |
| + | [* icon_caution] Make sure to place the parts you have removed in an organized manner so that you know what goes where, when you are reassembling your computer. |