Saltar al contenido principal

Cambios al paso #1

Editado por Ryan Miller

Edicion aprobada por Ryan Miller

Antes
Después
Sin cambios

Líneas de Paso

[* black] First make sure your computer is properly and completely shutdown.
[* black] Make sure to unplug anything connected to your computer, including the charger and USB drives.
[* red] Start by unscrewing the small panel on the bottom right of the computer.
[* icon_note] There is only one screw to remove in this step.
- [* black] Throughout the entire guide, there is only one 4.5mm screw. The rest of the screws in this guide are 6.5mm screws. Both types are size #00 Phillips heads.
+ [* icon_note] Throughout the entire guide, there is only one 4.5mm screw. The rest of the screws in this guide are 6.5mm screws. Both types are size #00 Phillips heads.