Saltar al contenido principal

Cambios al paso #1

Editado por Ryan Miller

Edicion aprobada por Ryan Miller

Antes
Después
Sin cambios

Líneas de Paso

-[* black] First make sure your computer is properly and completely shutdown
- [* black] Make sure to unplug anything connected to your computer, including the charger and USB drives
-[* red] Start by unscrewing the small panel on the bottom right of the computer
-[* icon_note] There is only one screw to remove in this step
- [* icon_note] All the screws in this guide are 6.5mm screws, besides one 4.5mm, with size #00 Phillips heads
+[* black] First make sure your computer is properly and completely shutdown.
+ [* black] Make sure to unplug anything connected to your computer, including the charger and USB drives.
+[* red] Start by unscrewing the small panel on the bottom right of the computer.
+[* icon_note] There is only one screw to remove in this step.
+ [* black] Throughout the entire guide, there is only one 4.5mm screw. The rest of the screws in this guide are 6.5mm screws. Both types are size #00 Phillips heads.