Saltar al contenido principal

Cambios a este Paso

Editado por Peter Lennox

Edicion aprobada por Peter Lennox

Antes
Después
Sin cambios

Líneas de Paso

-[* black] The battery is now seen with some connections to the logic board
-[* black] Use the tweezers to gently disconnect the two connectors that are found running across the battery
-[* black] Proceed to gently remove the tape like connector from the battery until it is completely off
-[* black] Use the tweezer to disconnect the battery’s wire from the logic board
+[* black] The battery is now seen with some connections to the motherboard.
+[* black] Use the tweezers to gently disconnect the two connectors that are found running across the battery.
+[* black] Proceed to gently remove the tape like connector from the battery until it is completely off.
+[* black] Use the tweezer to disconnect the battery’s wire from the motherboard.