Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Aiden Baker

Edicion aprobada por Aiden Baker

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Place the screws on the magnetic mat to avoid losing them.
[*
red] Use a 3.0 Phillip’s000 phillips head screwdriver to remove the 10 1.2mm Phillip’sphillips head screws in the plastic frame that heldhold the motherboard and battery.
[* orange] Use a 3.0 Phillip’s000 phillips head screwdriver to remove the 3 0.5mm Phillip’sphillips head screws in the plastic frame that heldhold the motherboard and battery.
[* icon_caution] Place the screws on the magnetic mat to avoid losing them.
[*
red] Use a 3.0 Phillip’s000 phillips head screwdriver to remove the 10 1.2mm Phillip’sphillips head screws in the plastic frame that heldhold the motherboard and battery.
[* orange] Use a 3.0 Phillip’s000 phillips head screwdriver to remove the 3 0.5mm Phillip’sphillips head screws in the plastic frame that heldhold the motherboard and battery.
[* yellow] Use the small [product|IF145-000|plastic opening tool] and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.