Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Paola

Edicion aprobada por Paola

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Place the screws on the magnetic mat to avoid losing them.
[*
red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the motherboard and batterybattery.
[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the motherboard and battery
[* icon_caution] Place the screws on the magnetic mat to avoid losing them
battery.
[* yellow] Use the small plastic[product|IF145-000|plastic opening tooltool] and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.
[* icon_caution] Place the screws on the magnetic mat to avoid losing them.
[*
red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the motherboard and batterybattery.
[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the motherboard and battery
[* icon_caution] Place the screws on the magnetic mat to avoid losing them
battery.
[* yellow] Use the small plastic[product|IF145-000|plastic opening tooltool] and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.