Saltar al contenido principal

Cambios al paso #3

Editado por Paola

Edicion aprobada por Paola

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the motherboard and battery
-[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the motherboard and battery
-[* icon_caution] Place the screws on the magnetic mat to avoid losing them
-[* yellow] Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.
+[* red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the motherboard and battery.
+[* icon_caution] Place the screws on the magnetic mat to avoid losing them.
+[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the motherboard and battery.
+[* yellow] Use the small [product|IF145-000|plastic opening tool] and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.