Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Peter Lennox

Edicion aprobada por Peter Lennox

Antes
Después
Sin cambios

Líneas de Paso

[* red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the mother boardmotherboard and battery
[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the mother boardmotherboard and battery
[* red] Use a 3.0 Phillip’s head screwdriver to remove the 10 1.2mm Phillip’s head screws in the plastic frame that held the mother boardmotherboard and battery
[* orange] Use a 3.0 Phillip’s head screwdriver to remove the 3 0.5mm Phillip’s head screws in the plastic frame that held the mother boardmotherboard and battery
[* icon_caution] Place the screws on the magnetic mat to avoid losing them
[* yellow] Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.