Saltar al contenido principal

Cambios al paso #3

Editado por William Pendeergraft

Edicion aprobada por William Pendeergraft

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use a 3.0 Phillip’s head screwdriver to remove the 13 Phillip’s head screws in the plastic frame that held the logic board and battery
+[* red] Use a 3.0 Phillip’s head screwdriver to remove the 13 Phillip’s head screws in the plastic frame that held the mother board and battery
[* black] Place the screws on the magnetic mat to avoid losing them
[* black] Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.