Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Peter Lennox

Edicion aprobada por Peter Lennox

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use a 3.0 Phillip’s head screwdriver to remove the 13 Phillip’s head screws in the plastic frame that held the logic board and battery
[* black] Place the screws on the magnetic mat to avoid losing them
[* black] TakeUse the small plastic spudgeropening tool and place it in the slot on the bottom right corner and carefully pry offof the inner plastic frame and carefully pry it off.
[* black] TakeUse the small plastic spudgeropening tool and place it in the slot on the bottom right corner and carefully pry offof the inner plastic frame and carefully pry it off.