Saltar al contenido principal

Cambios al paso #2

Editado por Aiden

Edicion aprobada por Aiden

Antes
Después
Sin cambios

Líneas de Paso

[* black] Using the flat [product|IF145-012|metal spudger] and curved metal spudger, make a wedge between the plastic back cover and the inner frame
[* black] Using the second spudger, slowly work your way around the perimeter of the device
-[* black] Check for clicking sounds as you are prying the back cover away from the frame
+ [* icon_note] Listen for clicking sounds as you are prying the back cover away from the frame
[* black] As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back