Saltar al contenido principal

Changes to Step #14

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] The logic board is still attached to the computer by one more cable, so don't lift the logic board too far out of the computer yet.
[* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case.
[* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces.