Saltar al contenido principal

Changes to Step #11

Editado por iRobot

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Peel up the iSight and inverter board cables from above the left fan.
[* black] Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the fan up.
[* black] Place the fan above the Airport card. It is not necessary to entirely remove the fan from the computer.

Imagen 1

No hay imagen previa

Añadida