Saltar al contenido principal

Cambios al paso #3

Editado por Ron Davis

Edicion aprobada por Ron Davis

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] The ribbon cables under the battery need to be detached from other electronics as a precaution in case the ribbon cables remain stuck to the battery during removal.
-[* red] Gently lift each of the flaps with a metal spudger.
-[* black] Use a flat object like a spudger or an unused plastic ID card to gently pry the battery from device.
-[* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best to use a card to pry the battery away from its housing. If there is resistance, use a spudger to detach the glue while the battery is partially raised.
+[* red] Gently lift the flaps on the four ZIF connectors.
+[* black] Use a plastic card to gently pry the battery from device.
+ [* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best to use a card to pry the battery away from its housing. If there is resistance, use a spudger to detach the glue while the battery is partially raised.