Saltar al contenido principal

Cambios al paso #3

Editado por Temi Adegoke

Edicion aprobada por Temi Adegoke

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] The ribbon cables under the battery are detached as a precaution in case the ribbon cables remain stuck to the battery during removal.
[* red] Gently lift each of the flaps with a metal spudger.
[* black] Use a flat object like a spudger or a plastic ID card to gently pry the battery from device.
-[* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best use a card to pry the battery away for its housing. If you feel resistance, locate the source and use your spudger to detach the glue.
+[* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best to use a card to pry the battery away from its housing. If resistance is felt, locate the source and use a spudger to detach the glue.