Saltar al contenido principal

Cambios al paso #3

Editado por Temi Adegoke

Edicion aprobada por Temi Adegoke

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate the four black plastic flaps depicted.
[* icon_note] The ribbon cables under the battery are detached as a precaution in case the ribbon cables remain stuck to the battery during removal.
-[* black] Gently lift each of the flaps with a metal spudger.
+[* red] Gently lift each of the flaps with a metal spudger.
[* black] Use a flat object like a spudger or a plastic ID card to gently pry the battery from device.
[* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best use a card to pry the battery away for its housing. If you feel resistance, locate the source and use your spudger to detach the glue.