Saltar al contenido principal

Cambios al paso #3

Editado por Thomas Rill

Edicion aprobada por Thomas Rill

Antes
Después
Sin cambios

Líneas de Paso

[* red] Locate the four black plastic flaps depicted.
[* icon_note] The ribbon cables under the battery are detached as a precaution in case the ribbon cables remain stuck to the battery during removal.
-[* black] Gently lift the flaps with a metal spudger.
+[* black] Gently lift each of the flaps with a metal spudger.
[* black] Use a flat object like a spudger or a plastic ID card to gently pry the battery from device.
-[* icon_note] There may be glue or tape attached to the bottom of the battery, so it is best use a card to pry the battery away. If you feel resistance, locate the source and use your spudger to detach the glue.
+[* icon_note] There may be glue holding the bottom of the battery to the housing, so it is best use a card to pry the battery away for its housing. If you feel resistance, locate the source and use your spudger to detach the glue.