Saltar al contenido principal

Cambios al paso #2

Editado por Temi Adegoke

Edicion aprobada por Temi Adegoke

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate the screw holding the orange ribbon cable in place.
-[* orange] Locate the tape holding the ribbon cable down.
-[* black] Unscrew the screw with a j000 Philips head bit.
+[* red] Unscrew the screw with a j000 Philips head bit.
[* icon_note] Using screwdriver bits that do not fit snugly in the screw head have a tendency to strip the screw and render it unusable.
-[* black] Remove the tape by gently scraping the edges up with a black plastic spudger.
+[* orange] Remove the tape by gently scraping the edges up with a black plastic spudger.