Saltar al contenido principal

Cambios al paso #2

Editado por Thomas Rill

Edicion aprobada por Thomas Rill

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate the screw holding the orange ribbon cable in place
-[* orange] Locate the tape holding the ribbon cable down
-[* black] Unscrew the screw with a j000 Philips head bit
-[* icon_note] Using screwdriver bits that do not fit snugly in the screw have a tendency to strip the screw and render it unusable
-[* black] Remove the tape by gently scraping it up with a black plastic spudger
+[* red] Locate the screw holding the orange ribbon cable in place.
+[* orange] Locate the tape holding the ribbon cable down.
+[* black] Unscrew the screw with a j000 Philips head bit.
+[* icon_note] Using screwdriver bits that do not fit snugly in the screw have a tendency to strip the screw and render it unusable.
+[* black] Remove the tape by gently scraping it up with a black plastic spudger.