Saltar al contenido principal

Cambios al paso #2

Editado por Thomas Rill

Edicion aprobada por Thomas Rill

Sin cambios

Líneas de Paso

-[* red] Locate the screw holding the cable in place
+[* red] Locate the screw holding the orange ribbon cable in place
[* orange] Locate the tape holding the ribbon cable down
[* black] Unscrew the screw with the j000 Philips head bit
-[* icon_note] Larger bits are more likely to strip the screw
+[* icon_note] Using screwdriver bits that do not fit snugly in the screw have a tendency to strip the screw and render it unusable
[* black] Remove the tape by gently scraping it up with a black plastic spudger