Saltar al contenido principal

Cambios al paso #4

Editado por Kamari Ratliff

Edicion aprobada por Kamari Ratliff

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Locate the Motor Core and follow it's power wires to the Attached power cord.
+[* icon_caution] Black being {Negative} goes with the Black wire, Red being {Positive} goes with white cord connected to the Attached power cord.
+[* black] Next: unravel the {Positive,Negative} wire from the motor that connects to the wire attached cord.
+[* black] Strip the ends of each wire with the strippers to reveal enough wire to twist back together with new motor wires .
+[* icon_reminder] Be sure to keep track of the corresponding wires and their locations to match when the new motor is inserted.