Saltar al contenido principal

Cambios al paso #4

Editado por Marcus Thomas

Edicion aprobada por Marcus Thomas

Antes
Después
Sin cambios

Líneas de Paso

[* black] Locate the Motor Core and follow it's power wires to the Attached power cord.
[* icon_caution] Black being {Negative} goes with the Black wire, Red being {Positive} goes with white cord connected to the Attached power cord.
[* black] Next: unravel the {Positive,Negative} wire from the motor that connects to the wire attached cord.
-[* black] Strip the ends of each wire with the strippers to reveal enough wire to twist back together with new motor wires .
+[* black] Strip the ends of each wire with the wire strippers approximately 1-2cm down to reveal enough wire to twist back together with new motor's wires .
[* icon_reminder] Be sure to keep track of the corresponding wires and their locations to match when the new motor is inserted.

Imagen 2

Versión Antigua

Nueva Versión