Saltar al contenido principal

Cambios al paso #1

Editado por alex

Edicion aprobada por alex

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] Caution: Make sure the clippers are unplugged from the wall before beginning teardown.
-[* red] Using the Philips screwdriver unscrew the two housing cover screws to expose the inner parts.
-[* yellow] Next, using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the ***razor***.
-[* icon_reminder] Be sure to keep track of appropriate washers with each screw
-[* orange] Using the Philips screwdriver, remove the switch installment screw indicated.
+[* icon_caution] Caution: Make sure the clippers are unplugged from any ***electrical*** outlets before beginning teardown.
+[* red] Using the Philips screwdriver, unscrew the two housing cover screws indicated to expose the inner parts.
+[* yellow] using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the ***Coil Assembly***.
+[* icon_reminder] keep track of appropriate washers with each screw
+[* orange] Using the Philips screwdriver, remove the ***switch installment screw ***indicated.