Saltar al contenido principal

Cambios al paso #1

Editado por alex

Edicion aprobada por alex

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] DANGER: Make sure the clippers are unplugged before beginning teardown.
-[* blue] Using the Philips screwdriver unscrew the two housing cover screws to expose the inner components.
-[* red] Next, using the Philips head, unscrew the two field mounting screws holding down the ***Coil Assembly***.
-[* icon_note] Be sure to keep track of appropriate washers with each screw
-[* orange] Using the Philips head, remove the switch installment screw indicated.
+[* red] Using the Philips screwdriver unscrew the two housing cover screws to expose the inner parts.
+[* yellow] Next, using the Philips screwdriver, unscrew the two mounting screws indicated, holding down the ***razor***.
+[* icon_reminder] Be sure to keep track of appropriate washers with each screw
+[* orange] Using the Philips screwdriver, remove the switch installment screw indicated.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión