Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #4

Editado por Tom Brandolini

Edicion aprobada por Jake Devincenzi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the edge of a plastic opening tool to disconnect the Wi-Fi antenna cable connector from the logic board.
[* icon_caution] When reconnecting the wifi ribbon connector to the mother board be VERY certain that the round connector at the end of the ribbon cable is centered on its mating half on the motherboard before applying pressure. Failure to do so will likely destroy both halves of the connection.