Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #7

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the 3.4 mm Phillips screw near the vibrator motor.
[* orange] Use a small flathead screwdriver to removeRemove the two 3.6 mm standoffsstandoff screws along the side of the logic board nearest the battery opening.
[* orange] Use a small flathead screwdriver to removeRemove the two 3.6 mm standoffsstandoff screws along the side of the logic board nearest the battery opening.