Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #7

Editado por Andrew Bookholt

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert wisdom herered] Remove the 3.4 mm Phillips screw near the vibrator motor.
[* orange] Use a small flathead screwdriver to remove the two 3.6 mm standoffs along the side of the logic board nearest the battery opening
.
[* black] Insert wisdom herered] Remove the 3.4 mm Phillips screw near the vibrator motor.
[* orange] Use a small flathead screwdriver to remove the two 3.6 mm standoffs along the side of the logic board nearest the battery opening
.

Imagen 1

Versión Antigua

Nueva Versión