Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #6

Editado por Dominik Schnabelrauch

Edicion aprobada por Dominik Schnabelrauch

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the 2.5 mm Phillips #000 screw securing the logic board near the power button.
[* orange] Remove the 4.8 mm standoff screw near the headphone jack.
[* icon_note] Standoff screws are best removed withusing an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In a pinch,
a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can alsowill do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* icon_note] Standoff screws are best removed withusing an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true].
[* icon_caution] In a pinch,
a [product|IF145-388-5|standoff screwdriver|new_window=true] or [product|IF145-343|standoff driver bit]. A small flathead screwdriver can alsowill do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.