Repara tus cosas Comunidad Tienda

Cambios al paso #3

Editado por Rachel —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] On the side parallel to the rubber cover, open the battery casing by pushing slightly in the direction of the arrow.
-[* red] Note: you may see a memory card. If so, remove the card by pushing down on it until you hear a click, and it will come loose so you can gently pull it out.
+[* black] On the side opposite the rubber cover, open the battery casing by pushing slightly in the direction of the arrow.
+[* red] Note: you may see a memory card. If so, remove the card by pushing down on it and it will come loose so you can gently pull it out.
[* black] Using the Phillips head screwdriver, remove the two screws on either side of the memory card, and set them aside.