Saltar al contenido principal

Cambios al paso #10

Editado por Renee Young

Edicion aprobada por Renee Young

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove two screws on the side where the battery is located.
-[* blue] Remove the lanyard loop after the screws come off.
-[* black] Slowly pull the side casing so it becomes dislocated from the top of the camera frame.
+[* red] Use your screwdriver to remove the two screws from the side of the camera that has the strap mount.
+[* black] Now that the screws are removed, you will be able to remove the strap mount.
+[* black] Slowly pull the side casing so that it becomes dislocated from the top of the camera frame.

Imagen 2

Versión Antigua

Nueva Versión