Cambios al paso #5
Editado por Justin —
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_caution] Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points. | |
| [* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge. | |
| - | [* |
| + | [* red] Locate the white ribbon cable attached to the underside of the main circuit board. |
| [* red] Gently remove the white ribbon cable from the connector. |