Saltar al contenido principal

Cambios al paso #1

Editado por Angelo

Edicion aprobada por Angelo

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_note] Unless otherwise stated,a #00 philips screwdriver is used to remove all screws.
-[* red] Remove the 4.75mm screw located in the top right corner on the backside of the camera.
-[* yellow] Remove the four 4.75mm screws located on the bottom of the camera.
+[* icon_note] Unless otherwise stated, use a Phillips #00 screwdriver to remove all screws.
+[* red] Remove the 4.75 mm screw that sits at the top right corner, on the backside of the camera.
+[* yellow] Remove the four 4.75 mm screws that sit at the bottom of the camera.