Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #24

Editado por Scott Havard

Edicion aprobada por Scott Havard

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert an opening tool underneath the motherboardlogic board on the other side of the rectangular cut out and pry it up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* black] Insert an opening tool underneath the motherboardlogic board on the other side of the rectangular cut out and pry it up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.