Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #24

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Antes
Después
Sin cambios

Líneas de Paso

[* black] Insert the openingan opening tool underneath the motherboard on the other side of the rectangular cut out on the upper portion of the motherboard and pry it up.
[* black] While keepingKeep the opening tool underneath the logic board,board and slide it down the length of the gap to free the upper end of the logic board from the adhesivegap.
[* black] Insert the openingan opening tool underneath the motherboard on the other side of the rectangular cut out on the upper portion of the motherboard and pry it up.
[* black] While keepingKeep the opening tool underneath the logic board,board and slide it down the length of the gap to free the upper end of the logic board from the adhesivegap.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.