Saltar al contenido principal

Cambios a Paso #24

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.
[* black] Insert the opening tool underneathon the other side of the rectangular cut out.
[* black] Pry
out on the upper portion of the motherboard and pry it up.
[* black] SlideWhile keeping the opening tool downunderneath the logic board, slide it down the length of the gap to free the upper end of the logic board from the adhesive.
[* icon_caution] Lift the the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener
.