Saltar al contenido principal

Cambios a Paso #23

Editado por Scott Havard

Edicion aprobada por Scott Havard

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert a plastic opening tool underneath the motherboardlogic board, inside the rectangular cut out, and gently pry the motherboardlogic board up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* black] Insert a plastic opening tool underneath the motherboardlogic board, inside the rectangular cut out, and gently pry the motherboardlogic board up.
[* black] Slide the opening tool down the length of the gap while continuing to pry the motherboardlogic board up.
[* icon_caution] Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.