Saltar al contenido principal

Cambios a Paso #23

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert a plastic opening tool underneath the motherboardmotherboard, inside the rectangular cut outout, and gently pry the motherboard up.
[* black] While keepingKeep the opening tool underneath the logic board,board and slide it down the length of the gap to free the upper, left end of the logic board from the adhesivegap.
[* black] Insert a plastic opening tool underneath the motherboardmotherboard, inside the rectangular cut outout, and gently pry the motherboard up.
[* black] While keepingKeep the opening tool underneath the logic board,board and slide it down the length of the gap to free the upper, left end of the logic board from the adhesivegap.
[* icon_caution] Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.