Saltar al contenido principal

Cambios a Paso #23

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert ana plastic opening tool underneath the motherboard inside the rectangular cut out and gently pry the motherboard up.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the gap to continue pryingfree the motherboard upupper, left end of the logic board from the adhesive.
[* black] Insert ana plastic opening tool underneath the motherboard inside the rectangular cut out and gently pry the motherboard up.
[* black] SlideWhile keeping the opening tool underneath the logic board, slide it down the length of the gap to continue pryingfree the motherboard upupper, left end of the logic board from the adhesive.
[* icon_caution] Lift the logic board slowly. If you encounter significant resistance, stop prying and reapply the iOpener.