Saltar al contenido principal

Cambios a Paso #17

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] start peelinicon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
[* black] Insert an opening pick under the Lightning cable where it meets the logic board.
[* black] Slide the opening pick towards towards the bend in the cable.
[* black] start peelinicon_note] The Lightning connector cable is stuck to the case with some adhesive. To detach the adhesive you will be sliding an opening pick between the cable and the case. Be very careful not to cut the Lightning connector cable itself.
[* black] Insert an opening pick under the Lightning cable where it meets the logic board.
[* black] Slide the opening pick towards towards the bend in the cable.