Saltar al contenido principal

Cambios al paso #3

Editado por Allen Pasch

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] Remove the antenna motherboard slowly to avoid damaging the wiring.
-[* black] Gently pull the antenna motherboard out of its casing and set it aside.
-[* black] The yellow wire is connected to the motherboard, so you cannot disconnect it until you open the device.
+[* icon_caution] Remove the antenna circuit board slowly to avoid damaging the wiring.
+[* black] Gently pull the antenna circuit board out of its casing and set it aside.
+[* black] The yellow wire is connected to the circuit board, so you cannot disconnect it until you open the device.