Saltar al contenido principal

Cambios al paso #3

Editado por Michael Duffield

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] Remove the antenna case slowly to avoid damaging the wiring.
-[* black] Remove the antenna case by sliding the black cylinder with a screwdriver.
+[* icon_caution] Remove the antenna circuit board slowly to avoid damaging the wiring.
+[* black] Gently pull the antenna circuit board out of its casing and set it aside.
+[* black] The yellow wire is connected to the motherboard, so you cannot disconnect it until you open the device.