Cambios al paso #1
Editado por Robert Manno —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Remove 2 screws, and detach 3 ribbons, all on the front of the camera |
|---|---|
| - | [* black] Remove newly exposed screw, and unhinge black tab to slide out ribbon |
| - | [* black] Only thing keeping logic board in place is black nub. Lift logic board from that corner with increasing force until it pops out |
| + | [* black] Remove 2 screws using a screwdriver. |
| + | [* black] Detach 3 ribbons by pulling up on them. All are on the front of the camera. |
| + | [* black] Remove newly exposed screw with screwdriver. |
| + | [* black] Unhinge black tab to slide out ribbon. |
| + | [* black] The only thing keeping logic board in place is a black nub. Lift the logic board from that corner with increasing force until it pops out. |