Repara tus cosas Comunidad Tienda

Cambios al paso #12

Editado por Alyssa Osberg —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* yellow] Remove one screw from the right side of the logic board and under the flash. The screw has these measurements: 2.85mm head and 3.85mm length.
-[* icon_note] The ends of the connecting ribbons may get caught on the logic board as you remove it from the camera. Use your fingers to hold each of the ribbons back while lifting the logic board.
-[* black] Gently pull the logic board away from the front of the camera.
+[* yellow] Remove one screw from the right side of the motherboard and under the flash. The screw has these measurements: 2.85mm head and 3.85mm length.
+[* icon_note] The ends of the connecting ribbons may get caught on the motherboard as you remove it from the camera. Use your fingers to hold each of the ribbons back while lifting the logic board.
+[* black] Gently pull the motherboard away from the front of the camera.