Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Zhenyu Lei

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[* blackyellow] Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.
[* blackyellow] Remove the 2 screws(4.08mm) on the other side. One is located under the rubber USB flap.
[* blackyellow] Remove the last screw(2.59mm) located on the bottom of the camera.
[* blackyellow] Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.
[* blackyellow] Remove the 2 screws(4.08mm) on the other side. One is located under the rubber USB flap.
[* blackyellow] Remove the last screw(2.59mm) located on the bottom of the camera.
[* black] Slowly pull the back cover of the camera.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión